Reabsorción dentinaria interna coronaria: informe de un caso clínico / Coronary internal dentine resorption: report of a clinical case

Objetivo: La reabsorción dentinaria interna es un pro- ceso causado por la actividad odontoclástica asociada princi- palmente a la inflamación pulpar crónica y/o traumatismos, y se caracteriza por la pérdida progresiva de tejido dentinario y la posible invasión al cemento. El presente informe describe el diagnóstico y tratamiento de un molar inferior que presentó un cuadro sintomático de reabsorción dentinaria interna. Caso clínico: Un paciente de 38 años fue derivado a la consulta por presentar una zona de reabsorción interna en un segundo molar inferior. Durante el examen clínico y ra- diográfico se tomó una radiografía preoperatoria periapical con radiovisiógrafo en la que se observó la presencia de un área compatible con el diagnóstico de reabsorción dentinaria interna, el que fue posteriormente confirmado por medio de una tomografía computada de haz cónico. La imagen de la lesión se presentó como una zona radiolúcida deformante de bordes nítidos, localizada a nivel de la cámara pulpar. El tra- tamiento consistió en la extirpación de la pulpa coronaria y de la instrumentación, desinfección y obturación de los conduc- tos radiculares y la cavidad de acceso. En el control clínico y radiográfico realizado luego de 3 años se observó que el paciente estaba asintomático y las estructuras perirradiculares se encontraban dentro de los límites normales. La observación histológica del material removido de la cámara pulpar reveló la presencia de un tejido granulomatoso con numerosos vasos sanguíneos y escasos focos micro hemorrágicos. Hasta el momento, el tratamiento endodóntico es el pro- cedimiento indicado para el tratamiento de la reabsorción dentinaria interna. Se destaca la importancia de la tomografía computada de haz cónico para el diagnóstico y tratamiento temprano de las reabsorciones dentinarias internas a efectos de contar con un pronóstico favorable (AU)

Aim: Internal dentine resorption is aprocess caused by odontoclastic activity, mainly associated with chronic pulpal inflammation and/or trauma, and it'scharacterized by a pro- gressive loss of dentine tissue and the possible invasion of the cementum. This report describes the diagnosis and treatment of a lower molar that presented a symptomatic case of inter- nal dentine resorption. Clinical case: A 38-years old patient was referred to the office because of presenting an area of internal resorption in a lower second molar. During clinical and radiographic exam- ination, a periapical preoperative radiograph with radiovisio- graph was taken, in which the presence of an area compatible with the diagnosis of internal dentine resorption was observed, which was later confirmed by a cone-beam computed tomog- raphy.The image of the lesion was presented as a deforming radiolucent area with sharp edges, located at pulp chamber level. Treatment consisted of the removal of the coronary pulp and the instrumentation, disinfection and filling of the root ca- nals and the access cavity. In the clinical and radiographic control carried out 3 years after procedure, it was observed that the patient was asymptomatic and the periradicular struc- tures were within normal limits. The histological observation of the removed material from the pulp chamber revealed the presence of a granulomatous tissue with numerous blood ves- sels and scarce micro hemorrhagic focus. Until now, the endodontic treatment is the indicated pro- cedure to treat internal dentine resorption. It is necessary to highlight the importance of the cone-beam computerized to- mography for the early diagnosis and treatment of internal dentine resorptions in order to have a favorable outlook (AU)

Photobiomodulation and Pain Reduction in Patients Requiring Orthodontic Band Application: Randomized Clinical Trial.

PURPOSE: The aim of this study was to investigate the effect of Photobiomodulation (PBM) in managing orthodontic pain intensity over time in patients requiring band application on upper first molars. METHODS: Maxillary first molars were banded. In the trial group, each molar received single-session PBM on two buccal and two palatal points (λ = 830 ± 10 nm; 150 mW, 7.5 J/cm2; spot of 0.1 cm2; 5 sec per point), while the control group received a placebo treatment. All patients were asked to answer five pain rating scales to assess pain intensity at 5 minutes and 1, 12, 24, and 72 hours and completed a survey describing the type of pain and its temporal course in the next 7 days. RESULTS: 26 patients (mean age 11.8 years) were randomly assigned to a control or a trial group. The trial group showed significantly lower pain intensities (p < 0.05) at 5 min (M = 0.92, SD = 1.32), 1 h (M = 0.77, SD = 1.01), and 12 h (M = 0.77, SD = 1.54) after band application compared to the control group (5 min: M = 1.62, SD = 1.26; 1 h: M = 1.77, SD = 1.92; and 12 h: M = 1.77, SD = 2.17), whereas no difference between groups (p > 0.05) was found at 24 h (trial: M = 0.62, SD = 1.71; control: M = 1.08, SD = 1.75) and 72 h (trial: M = 0.31, SD = 0.75; control: M = 0.15, SD = 0.55). Patients in the control group reported more frequently the presence of "compressive pain" (58.8%, p < 0.05) from the appliance during the week after the application, while the trial group showed higher frequency of "no pain" (46.2%, p < 0.05). However, PBM did not affect the pain onset (trial: M = 10.86, SD = 26.97; control: M = 5.25, SD = 7.86), peak (trial: M = 15.86, SD = 26.29; control: 6.17, SD = 7.96), and end time (trial: 39.57, SD = 31.33; control: M = 22.02, SD = 25.42) reported by the two groups (p > 0.05). CONCLUSIONS: PBM might be considered a promising alternative to decrease general pain intensity, although not affecting the typical pain cycle, in terms of the onset, peak, and ending times.

Class II malocclusion treatment changes with the Jones jig, Distal jet and First Class appliances.

Objective Maxillary molar distalization with intraoral distalizer appliances is a non-extraction orthodontic treatment used to correct molar relationship in patients with Class II malocclusion presenting maxillary dentoalveolar protrusion and minor skeletal discrepancies. This study compares the changes caused by three distalizers with different force systems. Methodology 71 patients, divided into three groups, were included. The Jones jig group (JJG, n=30; 16 male, 14 female, 13.17 years mean age) was treated with the Jones jig for 0.8 years. The Distal jet group (DJG, n=25; 8 male, 17 female, 12.57 years mean age) was treated with the Distal jet for 1.06 years. The First Class group (FCG, n=16; 6 male, 10 female, 12.84 years mean age) was treated with the First Class for 0.69 years. Intergroup treatment changes were compared using one-way ANOVA, followed by post-hoc Tukey's tests. Results Intergroup comparisons showed significantly greater maxillary incisor protrusion in DJG than in FCG (2.56±2.24 mm vs. 0.74±1.39mm, p=0.015). The maxillary first premolars showed progressive and significantly smaller mesial angulation in JJG, FCG and DJG, respectively (14.65±6.31º, 8.43±3.99º, 0.97±3.16º; p<0.001). They also showed greater mesialization in JJG than FCG (3.76±1.46 mm vs. 2.27±1.47 mm, p=0.010), and greater extrusion in DJG compared to JJG (0.90±0.77 mm vs 0.11±0.60 mm, p=0.004). The maxillary second premolars showed progressive and significantly smaller mesial angulation and mesialization in JJG, FCG and DJG, respectively (12.77±5.78º, 3.20±3.94º, -2.12±3.71º and 3.87±1.34 mm, 2.25±1.40 mm, 1.24±1.26 mm, respectively; p<0.001). DJG showed smaller distal angulation of maxillary first molars (-2.14±5.09º vs. -7.73±4.28º and -6.05±3.76º, for the JJG and FCG, respectively; p<0.001) and greater maxillary second molars extrusion (1.17±1.41 mm vs -0.02±1.16 mm and 0.16±1.40 mm, for the JJG and FCG, respectively; p=0.003). Overjet change was significantly larger in DJG compared to FCG (1.79±1.67 mm vs 0.68±0.84; p=0.046). Treatment time was smaller in FCG (0.69±0.22 years vs 0.81±0.33 years and 1.06±0.42 years, comparing it with the JJG and DJG, respectively; p=0.005). Conclusion The three appliances corrected the Class II molar relationship by dentoalveolar changes. The Distal jet produced smaller molar distal angulation than the Jones jig and First Class. The First Class appliance showed less anchorage loss, greater percentage of distalization and shorter treatment time than the Jones jig and Distal jet.

Effects on loads in temporomandibular joints for patients with mandibular asymmetry before and after orthognathic surgeries under the unilateral molar clenching.

Orthognathic surgery is a useful treatment for the correction of mandibular deformity. Different from other occlusions, unilateral occlusion is frequently used in mastication and influences functions of temporomandibular joints (TMJs). However, stress distributions in TMJ before and after orthognathic surgeries are not under consideration in treatments, crucial to pre- and postoperative temporomandibular disorders (TMDs). The study aims to analyze stress distributions in TMJs for patients with mandibular asymmetry before and after orthognathic surgeries under the unilateral molar clenching. Ten asymptomatic subjects (control group) and 10 patients with mandibular asymmetry were recruited for the study. All patients underwent orthognathic surgeries and were grouped as preoperative and postoperative for the purpose of comparing stress variation in TMJ before and after surgery. Finite element models corresponding to the unilateral molar clenching were constructed. The contact stresses at the ipsilateral side for asymptomatic subjects were significantly greater than those at the contralateral side, while the third principal stresses at the contralateral side were significantly greater than those at the ipsilateral side. No significant difference of stress distribution in TMJ between two sides appeared for the preoperative group. After surgeries, the stress distributions were close to the normal states. The stress of the preoperative group was found to be significantly higher than those of the control and postoperative groups. The variations in stresses before and after the surgery were consistent with the signs and symptoms or recoveries of TMD. Orthognathic surgery could alleviate the high level of stresses caused by mandibular asymmetry and is helpful for the recovery of TMD.

Class II malocclusion treatment changes with the Jones jig, Distal jet and First Class appliances

Abstract Objective Maxillary molar distalization with intraoral distalizer appliances is a non-extraction orthodontic treatment used to correct molar relationship in patients with Class II malocclusion presenting maxillary dentoalveolar protrusion and minor skeletal discrepancies. This study compares the changes caused by three distalizers with different force systems. Methodology 71 patients, divided into three groups, were included. The Jones jig group (JJG, n=30; 16 male, 14 female, 13.17 years mean age) was treated with the Jones jig for 0.8 years. The Distal jet group (DJG, n=25; 8 male, 17 female, 12.57 years mean age) was treated with the Distal jet for 1.06 years. The First Class group (FCG, n=16; 6 male, 10 female, 12.84 years mean age) was treated with the First Class for 0.69 years. Intergroup treatment changes were compared using one-way ANOVA, followed by post-hoc Tukey's tests. Results Intergroup comparisons showed significantly greater maxillary incisor protrusion in DJG than in FCG (2.56±2.24 mm vs. 0.74±1.39mm, p=0.015). The maxillary first premolars showed progressive and significantly smaller mesial angulation in JJG, FCG and DJG, respectively (14.65±6.31º, 8.43±3.99º, 0.97±3.16º; p<0.001). They also showed greater mesialization in JJG than FCG (3.76±1.46 mm vs. 2.27±1.47 mm, p=0.010), and greater extrusion in DJG compared to JJG (0.90±0.77 mm vs 0.11±0.60 mm, p=0.004). The maxillary second premolars showed progressive and significantly smaller mesial angulation and mesialization in JJG, FCG and DJG, respectively (12.77±5.78º, 3.20±3.94º, -2.12±3.71º and 3.87±1.34 mm, 2.25±1.40 mm, 1.24±1.26 mm, respectively; p<0.001). DJG showed smaller distal angulation of maxillary first molars (-2.14±5.09º vs. -7.73±4.28º and -6.05±3.76º, for the JJG and FCG, respectively; p<0.001) and greater maxillary second molars extrusion (1.17±1.41 mm vs -0.02±1.16 mm and 0.16±1.40 mm, for the JJG and FCG, respectively; p=0.003). Overjet change was significantly larger in DJG compared to FCG (1.79±1.67 mm vs 0.68±0.84; p=0.046). Treatment time was smaller in FCG (0.69±0.22 years vs 0.81±0.33 years and 1.06±0.42 years, comparing it with the JJG and DJG, respectively; p=0.005). Conclusion The three appliances corrected the Class II molar relationship by dentoalveolar changes. The Distal jet produced smaller molar distal angulation than the Jones jig and First Class. The First Class appliance showed less anchorage loss, greater percentage of distalization and shorter treatment time than the Jones jig and Distal jet.

Analysis of dental compensation in patients with facial asymmetry using cone-beam computed tomography.

INTRODUCTION: The purpose of this research was to evaluate dental compensation in facial asymmetry and its correlation with skeletal variables using cone-beam computed tomography. METHODS: Sixty adult patients were retrospectively divided into asymmetry (mean age, 21.8 ± 5.4 years) and symmetry groups (mean age, 28.1 ± 4.1 years); both groups comprised 30 patients. Independent and paired t tests were used for comparisons between the asymmetry and symmetry groups and between deviated (Dv) and nondeviated (NDv) sides of the asymmetry group, respectively. Pearson correlation between dental and skeletal variables was performed. RESULTS: The mean value of menton deviation was 9.4 mm in the asymmetry group. Compared with the symmetry group, the direction and amount of dental compensation of the asymmetry group were as follows: 2.5-mm extrusion of the maxillary first molar (UM6) at NDv (P <0.05); 1.8-mm higher position of the mandibular canine (LC) from the mandibular horizontal plane using mental foramen (MHP_mf) at NDv (P <0.05); 6°-more buccoversion of UM6 at Dv; 3.7°-more linguoversion of UM6 at NDv; 4.8°-more buccoversion of the maxillary canine (UC) at Dv; 4.9°-more buccoversion of the mandibular molar (LM6) at NDv; and 2.6°-more linguoversion of LC at Dv. Dental compensation correlated or marginally correlated with skeletal variables of the deviated mandible. CONCLUSIONS: Dental compensations, extrusion of the maxillary molars on the NDv, and buccal tipping of the maxillary teeth and lingual tipping of the mandibular teeth on the Dv, were observed. The mandibular body length was associated with linguoversion of the mandibular molars on the Dv. The ramal inclination was related to the extrusion of the maxillary molars on the NDv.

Factors associated with spontaneous angular changes of impacted mandibular third molars as a result of second molar protraction.

INTRODUCTION: This study aimed to identify significant factors affecting the spontaneous angular changes of impacted mandibular third molars as a result of second molar protraction. Temporary skeletal anchorage devices in the missing mandibular first molar (ML-6) or missing deciduous mandibular second molar (ML-E) with missing succedaneous premolar spaces provided traction. METHODS: Forty-one mandibular third molars of 34 patients (10 male and 24 female; mean age 18.3 ± 3.7 years) that erupted after second molar protraction were included in this study. They were classified into upright (U) and tilted (T) groups. Linear and angular measurements were performed at the time of treatment initiation (T1) and of ML-6 or ML-E space closure (T2). Regression analyses were used to identify significant factors related to third molar uprighting. RESULTS: Nolla stage (odds ratio [OR] 4.1), sex (OR 0.003 for male), third molar angulation at T1 (OR 1.1), missing tooth space (OR 0.006), rate of third molar eruption (OR 23.3), and rate of second molar protraction (OR 0.2) significantly affected third molar uprighting. Age, third molar angulation at T1, rate of third molar eruption, and rate of second molar protraction were significant factors for predicting third molar angulation at T2. CONCLUSIONS: Available space for third molar eruption before and after second molar protraction is not associated with uprighting of erupting third molars. Older patients whose third molars are in greater Nolla stage, are in a more upright position at T1, and have a greater eruption rate have a greater chance for third molar uprighting. Alternatively, an increase in second molar protraction rate results in mesial tipping of the third molars.

A Mouse Model to Study Reparative Dentinogenesis.

Different animal models have been introduced recently to study the process of reparative dentinogenesis in response to injury-induced pulp exposure. Using a mouse model is advantageous over other animal models since mice can be genetically manipulated to examine specific cellular pathways and lineage trace the progeny of a single cell. However, enabling a standardized molar damage in mice is demanding due to the small size of the teeth compared to the available dental instruments. Here we describe a reproducible and reliable in vivo model that allows us to study dentinogenesis in the first maxillary mouse molar.

Efficacy of Alveolar Ridge Preservation after Maxillary Molar Extraction in Reducing Crestal Bone Resorption and Sinus Pneumatization: A Multicenter Prospective Case-Control Study.

AIM: To evaluate, with three-dimensional analysis, the effectiveness of alveolar ridge preservation (ARP) after maxillary molar extraction in reducing alveolar bone resorption and maxillary sinus pneumatization when compared to unassisted socket healing. METHODS: Patients were included in the study following inclusion criteria and underwent minimally traumatic maxillary molar extraction followed by ARP using synthetic nanohydroxyapatite (Fisiograft Bone, Ghimas, Italy) (test group) or unassisted socket healing (control group). Cone-beam computerized tomographies (CBCT) were performed immediately after tooth extraction (T0) and 6 months postoperatively (T1). CBCTs were superimposed by using a specific software (Amira, Thermo Fisher Scientific, USA) and the following items were analyzed in both groups: (i) postextractive maxillary sinus floor expansion in coronal direction and (ii) postextractive alveolar bone dimensional changes (both vertical and horizontal). All data were tested for normality and equality of variance and subsequently analyzed by independent samples T-test and Mann-Whitney test. RESULTS: Thirty patients were treated by three centers and twenty-six (test n=13; control n=13) were included in the final analysis. Mean sinus pneumatization at T1 was 0.69±0.48 mm in the test group and 1.04±0.67 mm in the control group (p=0.15). Mean vertical reduction of the alveolar bone at T1 was 1.62±0.49 mm in the test group and 2.01±0.84 mm in the control group (p=0.08). Mean horizontal resorption of crestal bone at T1 was 2.73±1.68 mm in test group and 3.63±2.24 mm in control group (p=0.24). CONCLUSIONS: It could be suggested that ARP performed after maxillary molar extraction may reduce the entity of sinus pneumatization and alveolar bone resorption, compared to unassisted socket healing. This technique could decrease the necessity of advanced regenerative procedures prior to dental implant placement in posterior maxilla.

Three-dimensional assessment of external apical root resorption after maxillary posterior teeth intrusion with miniscrews in anterior open bite patients

ABSTRACT Objective: The objective of this study was to assess the external apical root resorption (EARR) of the maxillary posterior teeth after intrusion with miniscrews. Methods: Fifteen patients (13 females and 2 males) with age ranging from 14.5 to 22 years (mean 18.1 ±2.03 years) were selected to participate in this study. All patients presented with anterior open bite of 3 mm or more. An intrusion force of 300 g was applied on each side to intrude the maxillary posterior teeth. Cone beam computed tomography (CBCT) scans were taken pretreatment and post-intrusion and were analyzed to evaluate the EARR. Results: The maxillary posterior teeth were intruded in average 2.79 ± 0.46 mm (p< 0.001) in 5.1 ± 1.3 months, and all examined roots showed statistically significant EARR (p< 0.05) with an average of 0.55 mm, except the distobuccal root of the left first permanent molars and both the palatal and buccal roots of left first premolars, which showed no statistically significant changes. Conclusions: The evaluated teeth presented statistically significant EARR, but clinically, due to the small magnitude, it was not considered significant. Moreover, the CBCT provided a good visualization of all roots in all three planes, and it was effective in detecting minimal degrees of EARR.

RESUMO Objetivo: o objetivo desse estudo foi verificar a existência de reabsorção radicular apical externa (RRAE) em dentes posterossuperiores após intrusão ancorada em mini-implantes. Métodos: quinze pacientes (13 mulheres e 2 homens) com a idade variando entre 14,5 e 22 anos (média de 18,1 ± 2,03 anos) foram selecionados para participar desse estudo. Todos os pacientes possuíam mordida aberta anterior de 3mm ou mais. Uma força de 300 gramas foi aplicada em cada lado para intruir os dentes posterossuperiores. Tomografias computadorizadas de feixe cônico (TCFC), adquiridas antes do tratamento e após a intrusão, foram comparadas para se avaliar a RRAE. Resultados: os dentes posterossuperiores foram intruídos em média 2,70 ± 0,46 mm (p< 0,001) em 5,1 ± 1,3 meses, e todas as raízes examinadas mostraram RRAE estatisticamente significativa (p< 0,05), com média de 0,55 mm, exceto pela raiz distovestibular dos primeiros molares permanentes esquerdos, e pelas raízes palatina e vestibular dos primeiros pré-molares esquerdos, que não apresentaram mudanças estatisticamente significativas. Conclusões: os dentes avaliados apresentaram RRAE estatisticamente significativa, a qual, porém, não foi considerada clinicamente significativa, devido à sua reduzida magnitude. Além disso, a TCFC possibilitou uma boa visualização de todas as raízes nos três planos espaciais, e foi eficaz para detecção de níveis mínimos de RRAE.

Evaluation of Long-term Stability of Vertical Control in Hyperdivergent Patients Treated with Temporary Anchorage Devices.

This study aims to evaluate the long-term stability of vertical control in hyperdivergent patients treated with temporary anchorage devices. The sample included 20 hyperdivergent patients without anterior open bite. The temporary anchorage devices were used to intrude the upper incisor and molars for vertical control. Lateral cephalograms were established prior to treatment, immediately after treatment, and during retention. The upper molars and incisors were intruded by 1.33 mm and 1.41 mm after treatment (P<0.05). U6-PP increased by 0.11 mm and 0.23 mm during the first and second stages of retention (P>0.05). U1-PP was found to possess a significant extrusion of 1.2 mm during the first stage (P<0.05), which increased by 0.68 mm during the second stage (P>0.05). The mandibular plane angle (MP-SN) decreased by 2.58 degrees following treatment, and underwent a relapse of 0.51 degree and 0.42 degree during the first and second stages of retention respectively (P>0.05). No significant soft tissue changes occurred, with the exception of increased upper lip length during the second stage (P<0.05). Maxillary anterior and posterior intrusions, counter clockwise rotation of the mandibular plane, and improved profiles can be successfully achieved following treatment with vertical control. During the first stage of retention (less than three years), intruded molars and incisors both exhibited some extrusion, and molars had better long-term stability than incisors. During the second stage of retention (three to six years), the therapeutic effects appeared stable, with the exception of some increase in upper lip length. Rotated mandibular plane remained stable during the entire retention period.

The effect of osteopenia on tooth movement in ovariectomized rats. An experimental study.

OBJECTIVE: The purpose of this experimental study was to investigate in depth the effects of osteopenia related to the rate, as well as to the quality of orthodontic tooth movement, by combining experimental ovariectomy and molar movement in rats. METHODS: Twenty-four six-month-old female Wistar rats were used in this study. The animals were divided into two groups consisting of twelve animals each: Group A (control group) was subjected to orthodontic movement of the upper right first molars. Group B was subjected to orthodontic movement of the upper right first molar following bilateral ovariectomy. Ovariectomy was performed on the first experimental day and the upper right first molars were subjected to orthodontic forces 60 days post-ovariectomy, lasting for 14 days. RESULTS AND CONCLUSION: Direct inspections of the upper jaws, measurements of orthodontic movement of the upper right first molars of Group A and B, as well as histologic examinations of the alveolar bone in the upper right and left first molar regions, showed that osteopenia affects the rate of orthodontic tooth movement, as well as the quality of alveolar bone remodeling, in ovariectomized rats. Specifically, in the ovariectomized animals the alveolar bone of the non-loaded side showed extensive internal resorption, with large marrow cavities, whereas the alveolar bone of the loaded side was dense with almost no marrow cavity and frontal resorption on the surface. It appears that alveolar remodeling after the exertion of orthodontic forces follows the general paradigm of osteoporotic bone remodeling after loading.

Role of particulate concentration in tooth wear.

Results are presented for wear tests on human molar enamel in silica particle mediums. Data for different particle concentrations show severe wear indicative of material removal by plasticity-induced microcrack formation, in accordance with earlier studies. The wear rates are independent of low vol% particles, consistent with theoretical models in which occlusal loads are distributed evenly over all interfacial microcontacts. However, perhaps counter-intuitively, the wear rate diminishes substantially at higher vol%. This is attributed to a greater proportion of lower-load microcontacts transitioning into a region of mild wear, where microcracking is suppressed. Implications of these results in relation to evolutionary biology and dentistry are explored.

Three-dimensional assessment of external apical root resorption after maxillary posterior teeth intrusion with miniscrews in anterior open bite patients.

OBJECTIVE: The objective of this study was to assess the external apical root resorption (EARR) of the maxillary posterior teeth after intrusion with miniscrews. METHODS: Fifteen patients (13 females and 2 males) with age ranging from 14.5 to 22 years (mean 18.1 ±2.03 years) were selected to participate in this study. All patients presented with anterior open bite of 3 mm or more. An intrusion force of 300 g was applied on each side to intrude the maxillary posterior teeth. Cone beam computed tomography (CBCT) scans were taken pretreatment and post-intrusion and were analyzed to evaluate the EARR. RESULTS: The maxillary posterior teeth were intruded in average 2.79 ± 0.46 mm (p< 0.001) in 5.1 ± 1.3 months, and all examined roots showed statistically significant EARR (p< 0.05) with an average of 0.55 mm, except the distobuccal root of the left first permanent molars and both the palatal and buccal roots of left first premolars, which showed no statistically significant changes. CONCLUSIONS: The evaluated teeth presented statistically significant EARR, but clinically, due to the small magnitude, it was not considered significant. Moreover, the CBCT provided a good visualization of all roots in all three planes, and it was effective in detecting minimal degrees of EARR.

Study of epithelial rests of Malassez in an experimental periodontitis model.

The aim of this study was to evaluate the morphological alterations of epithelial cell rests of Malassez (ERMs) and their relationship with root resorption, in an experimental periodontitis (EP) model at 4 and 11 days. EP was induced in 14 male Wistar rats by placing a cotton thread ligature around the neck of the first lower right molar, for 4 (n=7) and 11 (n=7) days. The contralateral molar (left) was used as control. Following euthanasia, jaws were extracted and processed histologically to provide mesio-distal sections which were subject to H&E stain and histochemical detection technique with tartrate-resistant acid phosphatase (TRAP). The following histomorphometricparameters were evaluated on micrographs: bone area (BAr./TAr)(%), number of ERMs/mm2, number of cells/ERM, ERMs area (µm2), and percentage of root resorption surfaces (%RR). The results were analyzed statistically by ANOVA and Bonferronipost hoc (p≤ 0.05). Significant bone loss was observed in molars with EP compared to their controls. In the EP 4-Day group, no change was observed in the parameters with relation to the ERMs; however, in the EP 11-Day group, there was significant root resorption (%RR) (C: 3.21±3.07, EP-4D: 3.91±3.17, EP-11D: 23.67± 11.40; p≤ 0,05) and increase in ERMs area (µm2) (C: 455.87±145.42, EP-4D: 577.6±156.1, EP-11D: 1046.3± 582.9; p≤ 0,05). No TRAP+ ERM was found in either group. ERM hypertrophy may be related to ERMpartici-pation in mechanisms tending to establish periodontal homeostasis, inhibiting resorption and contributing toperiodon-tal regeneration.

El objetivo de este trabajo ha sido evaluar las alteraciones morfológicas de epithelial cell rests of Malassez (ERMs) y su relación con la reabsorción radicular, en un modelo de experimental periodontitis (EP) a 4 y 11 días. La EP fue inducida en 14 ratas Wistar macho mediante la colocación de una ligadura de hilo de algodón alrededor del cuello del primer molar inferior derecho, a 4 (n=7) y 11 (n=7) días. El molar contralateral (izquierdo) fue usado como control. Tras la eutanasia, se extrajeron los maxilares y se procesaron histológicamente para la obtención de cortes en sentido mesio-distal que se colorearon con H&E y técnica histoquímica de detección de tartrate-resistant acid phosphatase (TRAP). Se tomaron microfotografías y se evaluaron los siguientes parámetros histomorfométricos: Bone area (BAr./TAr)(%), N° de ERMs/mm2, N° de células/ERM, área de ERMs (µm2), y porcentaje de superficies de reabsorción radicular (%RR). Los resultados se analizaron estadísticamente mediante Anova y Bonferroni post hoc (p≤ 0.05). En los molares con PE se observó una pérdida ósea significativa en relación a sus controles. En el grupo EP 4 días no se observaron cambios en los parámetros en relación a los ERMs, sin embargo, en el grupo PE de 11 días se registró reabsorción radicular (%RR) significativa (C: 3.21±3.07, EP-4D: 3.91±3.17, EP-11D: 23.67±11.40; p≤ 0,05) junto con un aumento del área de ERMs (µm2) (C: 455.87±145.42, EP-4D: 577.6±156.1, EP-11D: 1046.3±582.9; p≤ 0,05). No se observaron ERMs TRAP+ en ninguno de los dos grupos. La hipertrofia de los ERMs, podría estar relacionada a la participación de los mismos en mecanismos tendientes a la homeostasis periodontal, inhibiendo dicha reabsorción y contribuyendo a la regeneración periodontal.

Role of Periapical Diseases in Medication-Related Osteonecrosis of the Jaws.

OBJECTIVE: The present study aimed to investigate the role of periapical diseases in inducing medication-related osteonecrosis of the jaws (MRONJ) using an ovariectomized (OVX) mice model. MATERIALS AND METHODS: Twenty C57BL/6N female mice were randomly assigned to two groups. All mice were subjected to bilateral ovariectomy and then treated with oncologic dose of zoledronic acid (ZA) or vehicle for twelve weeks. Eight weeks after commence of drug administration, a pulpal exposure (PE) operation was performed on the first right lower molar to induce periapical periodontitis; the contralateral non-PE tooth was used as control. All animals were sacrificed four weeks after pulpal exposure, and the mandibles were harvested for radiological and histomorphometrical analysis. RESULTS: Micro computed tomography (µ-CT) examination demonstrated that periapical diseases significantly increased alveolar bone resorption, and the resorption was greatly attenuated by ZA treatment. Concurrent ZA therapy significantly increased bone density and histological osteocyte necrosis in the presence of periapical lesions. CONCLUSION: ZA treatment reduced bone absorption resulting from periapical disease but increased the risk of developing MRONJ in the ovariectomized mouse model.

Stress Distribution, Tooth Remaining Strain, and Fracture Resistance of Endodontically Treated Molars Restored Without or With One or Two Fiberglass Posts And Direct Composite Resin.

OBJECTIVES: To evaluate the effects of direct composite resin without a post or with one or two fiberglass posts on the restoration of severely compromised endodontically treated molars. METHODS AND MATERIALS: Forty-five molars with 2 mm of "remaining tooth structure" were divided into three groups: Wfgp, restored with Filtek Z350XT without a fiberglass post; 1fgp, restored with Z350XT with one fiberglass post in the distal root canal; and 2fgp, restored with Z350XT with two fiberglass posts, one in the distal root canal and the other in the mesial-buccal root canal. The teeth were load cycled. Tooth remaining strain was measured using strain gauges (n=10) at two moments: TrSt-100 N, during 100 N occlusal loading, and TrSt-Fr, at fracture load. Fracture resistance was calculated, and fracture mode was classified. The elastic modulus and Vickers hardness were calculated using dynamic indentation (n=5). Stress distribution was analyzed by three-dimensional finite element analysis. RESULTS: The use of two fiberglass posts resulted in lower fracture resistance than was noted in the groups with one fiberglass post and without fiberglass posts. The lingual surface of the remaining tooth had higher strain values than the buccal surface, regardless of the restorative technique and moment of evaluation. The absence of a fiberglass post resulted in significantly higher strain values and more irreparable fracture modes than were noted in the other groups. The use of one fiberglass post had a better strain/fracture resistance ratio. Stresses were concentrated in the occlusal portion of the post and in the furcation region. The presence of one fiberglass post resulted in better stress distribution in the entire distal root dentin, reducing stress on the critical areas. CONCLUSIONS: The use of one fiberglass post for restoring molars with direct composite resin resulted in higher fracture resistance than did the use of two fiberglass posts; it also resulted in better tooth remaining strain and stress distribution and more reparable fracture modes than were seen in the group without a fiberglass post.

Influence of anthropometry, TMD, and sex on molar bite force in adolescents with and without orthodontic needs.

PURPOSE: Bite force has been studied as representative of functional indices of mastication and its value may have diagnostic significance in disorders of the musculoskeletal system of facial bones. This study aimed to evaluate bite force in adolescents with and without orthodontic needs considering presence of temporomandibular disorders (TMD) as well as anthropometry: craniofacial dimensions and body mass index (BMI). METHODS: A total of 80 subjects were screened (61 females, 19 males; 18 ± 3 years old). Unilateral molar bite force was measured using a digital dynamometer with a fork thickness of 12 mm. Direct anthropometry was used to quantify craniofacial measurements. Dental Health Component of the Index of Orthodontic Treatment Need (IOTN-DHC) and the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) were used to classify samples according to malocclusion and to TMD, respectively. Data were analyzed using normality tests, Mann-Whitney U test, and multiple linear regression analyses with stepwise backward elimination, controlling for the presence of malocclusion and TMD (p ≤ 0.05). RESULTS: The cephalic index was greater in females with malocclusion and the longitudinal cranial diameter was reduced in females with malocclusion. BMI was not different between normal and malocclusion groups for either gender. Bite force was negatively related with vertical dimension of the face, and positively related with facial width and facial index. The model explained 32% of bite force variability, considering the sample size (coefficient of determination R 2 = 0.324). CONCLUSIONS: Even when orthodontic needs and TMD signs and symptoms are present, stronger bite force is still observed in males and in subjects with smaller anterior facial heights and wider facial widths.

Ankylosis of Permanent First Molar: Diagnosis by Cone Beam Computed Tomography / Anquilosis del Primer Molar Permanente: Diagnóstico por Tomografía Computarizada con Haz Cónico

ABSTRACT: Ankylosis is an anomaly of tooth eruption characterized by the fusion of cementum and alveolar bone, and may affect from small regions to the entire root surface. Clinical assessment combined with imaging exams can aid diagnosis. Radiographic testing enables assessing only proximal regions of possibly affected roots. Whereas cone beam computed tomography (CBCT) allows a three-dimensional assessment of axial, coronal, and sagittal planes of all dental extension, eliminating thus overlapping images and helping to confirm the correct diagnosis. The present study contains a case report of a male patient with ankylosis in tooth 16 diagnosed by CBCT, aiming at providing information for dentists about this anomaly, its characteristics and situations in which CBCT should be indicated.

RESUMEN: La anquilosis es una anomalía de la erupción del diente caracterizada por la fusión de cemento y hueso alveolar, y puede afectar desde pequeñas regiones hasta toda la superficie de la raíz. La evaluación clínica combinada con los exámenes de imagen puede ayudar a diagnosticar esta anomalía. Las pruebas radiográficas permiten evaluar sólo las regiones proximales de las raíces posiblemente afectadas. La tomografía computarizada de haz de cono (CBCT) permite una evaluación tridimensional de los planos axial, coronal y sagital de toda la extensión dental, eliminando así las imágenes superpuestas y ayudando a confirmar el diagnóstico correcto. En el presente estudio se presenta un reporte de caso de un paciente con anquilosis en el diente 16 diagnosticado por CBCT, con el objetivo de proporcionar información para los dentistas sobre esta anomalía, sus características y situaciones en las que debe indicarse la CBCT.